Five Valve Manifold, Direct Mounting



Five Valve Manifold Model G5 VMPF 2 is designed for direct mounting on differential pressure instruments. The manifold incorporates two process isolation valves, one equalizer valve and two drain / vent valves with separate connections. The process connection is through threaded connections for tube or pipe assembly. The valves are suitably angled to prevent fouling with the instrument. Dimensions shown are for the standard 54 mm or 2 1/8 inch instrument connection centres but also available for other centres on request.

  • Specifications
  • How to Order
  • Enquiry
  • Download Pdf

Connections Process: ½" NPT (F)

Instrument: Ranged

Drain / Vent: ¼" NPT (F)
Test Pressure @ 25°C Room Temperature

Hydrostatic: Body - 415 bar (g)
                  Seat - 415 bar (g)

Pneumatic: Seat - 7 bar (g)
Gland Packing PTFE: Standard

GRAPHOIL: Temperatures above 200°C
Material A 105, A 182 / A 479 GR F 304, A 182 / A 479 GR F316, Monel, Hastelloy, Duplex
Finish CS zinc plated. SS Natural
Optional Test Port on precess side with plug
Accessory Mounting Bolts - IS: 1364 - 1960 - 4 Nos

Interface seal - PTFE / VITON - 2 Nos