Three Valve Manifold, Direct Mounting - G3VMPF2

G3VMPF2

Features


Designed for direct mounting on to standard differential pressure transmitters. This manifold block incorporates three valves, two main process isolation valves and one equalising valve. This design is suitable where the straight valve may foul with the instrument and to provide ease of operation. Dimensions shown above are for the standard 54 mm or 2 1/8 inch instrument connection Centre distance found in majority of instruments. The manifold is also available for instruments with other centre distances for instrument connections (as 55 mm, 56 mm and 57 mm) but dimensions shown will vary. Please consult factory for these dimensions.



  • Specifications
  • How to Order
  • Enquiry
  • Download Pdf


Connections Process: ½" NPT (F)

Instrument: Flanged

Drain/Vent: ¼" NPT (F)
Test Pressure @ 25°C Room Temperature

Hydrostatic: Body - 415 bar (g)
                  Seat - 415 bar (g)

Pneumatic: Seat - 7 bar (g)
Gland Packing PTFE: Standard

GRAPHOIL: Temperatures above 200°C
Material A 105, A 182 / A 479 GR F 304, A 182 / A 479 GR F316, Monel, Hastelloy, Duplex
Finish CS zinc plated. SS Natural
Option Drain Port on instrument side with drain plug. Test Port on process side with plug.
Accessory Mounting Bolts - IS: 1364 - 1960 - 4 Nos Interface seal - PTFE / VITON - 2 Nos